Overall PREORDER - 15 oz Japanese Jute Selvedge Denim
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
DESCRIPTION
These overalls represent a little bit of everything we’ve learned about designing and building work clothes over the last 10 years. We’ve been sketching these since 2013 and developing them for over a year. Our goal was simply to make the best overalls we could.
FEATURES
Relaxed straight fit (looser than our work jean/trouser/cargo in the leg - but we recommend sticking with your regular Grease Point waist size)
Reinforced knee panels
Triple stitched felled seams
Chambray lined bib and front pocket facings
Turn-of-the-century workwear inspired front pockets
Utility pockets on both sides
Zippered fly
Chest pocket with snap closure
Selvedge outseams and side closure gussets
Fully adjustable shoulder straps with no slider to dig into your collar bone
MATERIALS
15 oz neppy jute/cotton blend selvedge denim (jute is an alternative plant fiber, similar to hemp or linen) - Japan
8 oz chambray lined bib and front pocket facings
Sewn with tex 80 tonal thread from A&E - North Carolina, USA
Raw brass rivets from YKK (note that sample photo has copper rivets)
Raw brass snaps from YKK (note that sample photo has copper snaps- we are no longer able to source these domestically so they will be made with brass now)
Deadstock 1970’s Talon fly zipper - USA
Mil-spec hardened steel G Hook - USA
Mil-spec nylon webbing - USA
Designed, patterned, cut, sewn, and finished in our small workshop
FABRIC NOTES - 15 oz jute/cotton denim: This fabric has a crisp hand feel, is starchy, and a bit rough to begin with but softens up very nicely. Sanforized (preshrunk). Hand wash cold, hang dry.
SIZING
PLEASE CHECK OUT THE SIZING GUIDE! This product can only be exchanged- see exchange policy.
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
DESCRIPTION
These overalls represent a little bit of everything we’ve learned about designing and building work clothes over the last 10 years. We’ve been sketching these since 2013 and developing them for over a year. Our goal was simply to make the best overalls we could.
FEATURES
Relaxed straight fit (looser than our work jean/trouser/cargo in the leg - but we recommend sticking with your regular Grease Point waist size)
Reinforced knee panels
Triple stitched felled seams
Chambray lined bib and front pocket facings
Turn-of-the-century workwear inspired front pockets
Utility pockets on both sides
Zippered fly
Chest pocket with snap closure
Selvedge outseams and side closure gussets
Fully adjustable shoulder straps with no slider to dig into your collar bone
MATERIALS
15 oz neppy jute/cotton blend selvedge denim (jute is an alternative plant fiber, similar to hemp or linen) - Japan
8 oz chambray lined bib and front pocket facings
Sewn with tex 80 tonal thread from A&E - North Carolina, USA
Raw brass rivets from YKK (note that sample photo has copper rivets)
Raw brass snaps from YKK (note that sample photo has copper snaps- we are no longer able to source these domestically so they will be made with brass now)
Deadstock 1970’s Talon fly zipper - USA
Mil-spec hardened steel G Hook - USA
Mil-spec nylon webbing - USA
Designed, patterned, cut, sewn, and finished in our small workshop
FABRIC NOTES - 15 oz jute/cotton denim: This fabric has a crisp hand feel, is starchy, and a bit rough to begin with but softens up very nicely. Sanforized (preshrunk). Hand wash cold, hang dry.
SIZING
PLEASE CHECK OUT THE SIZING GUIDE! This product can only be exchanged- see exchange policy.
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
DESCRIPTION
These overalls represent a little bit of everything we’ve learned about designing and building work clothes over the last 10 years. We’ve been sketching these since 2013 and developing them for over a year. Our goal was simply to make the best overalls we could.
FEATURES
Relaxed straight fit (looser than our work jean/trouser/cargo in the leg - but we recommend sticking with your regular Grease Point waist size)
Reinforced knee panels
Triple stitched felled seams
Chambray lined bib and front pocket facings
Turn-of-the-century workwear inspired front pockets
Utility pockets on both sides
Zippered fly
Chest pocket with snap closure
Selvedge outseams and side closure gussets
Fully adjustable shoulder straps with no slider to dig into your collar bone
MATERIALS
15 oz neppy jute/cotton blend selvedge denim (jute is an alternative plant fiber, similar to hemp or linen) - Japan
8 oz chambray lined bib and front pocket facings
Sewn with tex 80 tonal thread from A&E - North Carolina, USA
Raw brass rivets from YKK (note that sample photo has copper rivets)
Raw brass snaps from YKK (note that sample photo has copper snaps- we are no longer able to source these domestically so they will be made with brass now)
Deadstock 1970’s Talon fly zipper - USA
Mil-spec hardened steel G Hook - USA
Mil-spec nylon webbing - USA
Designed, patterned, cut, sewn, and finished in our small workshop
FABRIC NOTES - 15 oz jute/cotton denim: This fabric has a crisp hand feel, is starchy, and a bit rough to begin with but softens up very nicely. Sanforized (preshrunk). Hand wash cold, hang dry.
SIZING
PLEASE CHECK OUT THE SIZING GUIDE! This product can only be exchanged- see exchange policy.
***This is a preorder item. Preorder is closed. We will do another run sometime in the not-too-distant future.*** Sign up for restock alerts to be notified about the next preorder opening ***
Chances are good that you will wear your typical waist size in GPWW. Overalls should be loose around your waist so the waist measurement will be larger than your pants by a few inches. Most people will take the same size for their overalls that they do in our other pant styles, despite the actual waist measurement of the overalls being being about 3-5” larger than the measured waist of your favorite pants.
For example if your measure the waist of your favorite jeans and get 36” (18” on the half - please watch our sizing video to learn how to do this properly) you will most likely take a tag size 34 in our other pants, and a tag size 34 in our overalls.
For more sizing info don't hesitate to contact info@greasepointworkwear.com with questions.
All measurements taken in inches.
INSEAM Please leave a note at checkout with your desired inseam length (26"-38"). Most fabrics will shrink 1-2” inches in length so erring on the longer side is recommended.